The newest fresh water generator to come out of Denmark has set the bar for innovation and technological advance. The best thing about the generator is that it does not need chemicals or any stimulants during the purification operation. The chemicals are mostly used to stop the salt and other particles from inhabiting the walls of the generator when they leave the water during purification. By using titanium plates and modules that use ultrasound, they have managed to make sure the salt does not stick to the generator.
The structure has been named ScaleGuard and is mostly used for about five minutes in one hour. The bubbles generated by the modules ae very small – almost microscopic – in size. However, they go into the hot surfaces on the generator and burst whenever they touch the sides, cleaning it at the same time as well. Through the brine, the deposits that would previously sit on the walls, are flushed out of the fresh water generator in a jiffy. The new technology has removed a lot of human effort from the process of purification of salt water that people on sea have to closely monitor.
The titanium plates (conical in structure) are said to be the most unique thing about the entire invention. The shape enables the sea water to disappear but it will also allow the modules to do their jobs correctly. There will be no corrosion problems as well as the new product is fully stainless steel. Another great thing about it is the fact that it is considered to be amongst the most user friendly innovations to ever come for a fresh water generator for a long time. The plates will not cause leakage when the generator is broken up for repairs and cleaning. The plates are placed parallel with the floor instead of standing upright so that the water trickled down. The reassembling becomes easier as well.
The new generator will not need days or even hours to install. The installation period will be over within a few minutes and can be done while the ship has docked on the bay. The unit is extremely easy to carry around as it does not weigh much and it also is designed to suit the designs already setup inside the ship. It can be done quite easily within a couple of hours and this is easily the time during which the ship may be changing passengers. In fact, it is bound to take longer for the ship to get ready for the journey than the time required to setup the new fresh water generator.
The generator now comes with a redesigned touchscreen display which allows smart and quick control of the appliance. The output is much higher than ever before and the generator guarantees to pelt out up to eighteen hundred gallons every day. The touch screen display is colored and the screen is wide enough to allow for proper browsing and control. The v4 control interface is amazingly helpful for people using the appliance as it is easy to manage and run. flushing time, starting time, output produced and other intuitive tasks are readily assigned with the help of the new generator.
The new generator has many automatic controls like positioning valves for brushing and cleaning, flushing out the junk accumulated overtime, backwashing time which forces the generator to stop when it needs to be cleaned and the like. There are many new and amazing features to look forward to when using the generator. However, since it is still new, it must be dealt with care and caution so that it lasts the journey. It is better to keep a customary backup – just in case.
No comments:
Post a Comment